SYNTHESIS IMPACT PROTECTION IMPLEMENTED IN A PARTICULAR FACILITY THROUGH FRICTION DAMPERS
DOI:
https://doi.org/10.68302/std2026.vol2.94Keywords:
computer kinematical analyses, four-bar linkage mechanism, Math LabAbstract
In the present study, a dedicated damper has been developed to significantly reduce the substantial recoil generated by the detonation of the mortar’s main charge. This enables the gunner of the artillery system to perform instrument calibration checks less frequently, which in turn contributes to more efficient mortar fire control.
Supporting Agencies
This paper has been supported by the Gabrovo Technical University research fund, project NIP 2026-28.Downloads
References
[1] I. Artobolevskiy, Theory of Mechanisms and Machines. Science, Moscow, 1967.
[2] V. Bhandari, Design of Machine Elements Fifth Edition, McGraw Hill 2020.
[3] V. Galabov, M. Marinov and N. Nikolov, Synthesison a guiding MF at two points, respectively phase relation and double midpoint, "Mechanics of machines" 1999, booklet 26.
[4] V. Galabov and M. Marinov, Synthesis of articulated four-link mechanism by discrete relative positions. "Mechanics of the machines",Varna, 2002.
[5] G. Iliev and H. Hristov, “Modelling and simulation ot electropneumatic positioning system including the length of pneumatic lines”, ETR, vol. 3, pp. 106–111, Jan. 2024, doi: 10.17770/etr2023vol3.7186.
[6] G. Iliev and H. Hristov, Speed control pneumatic cylinders using high speed 2 port on/off valves with pulse width modulation. environment, technologies, resources. Proceedings of the International Scientific and Practical Conference. 3, (Jun. 2024), 95–100. DOI:doi.org/10.17770/etr2024vol3.8117.
[7] J. Uicker, G. Pennok and J. Shigley, Theory of Machines and Mechanisms, Fifth Edition, Oxford University Press 2017.
[8] M. Marinov, Synthesis of planar mechanisms by extremely distant discrete positions. Dissertation abstract to get thescientific and educational degree "PhD" - TU Sofia 2002, pp.36.
[9] D. Myszka, Machines & Mechanisms: Applied Kinematic Analysis, 2011.
[10] M. Marinov, B. Stoychev, D. Guteva and M.Georgiev, Computer modeling and geometricanalysis of Click-Clack mechanisms. "Mechanics ofthe machines" 2016 booklet 118 pp.35-39.
[11] M. Stanisic, Mechanisms and machines; Kinematics, Dinamics and synthesis, Stamford 2015.
[12] L. Harrisberger, An overview of structural synthesis of three-dimensional mechanisms, constructingscience and technology of mechanical engineering, World, Moscow, 1965.
[13] D. Petrova, B. Vlahova, A. Lengerov and T. Zlateva-Petkova, Improvement of Constructive-Technological Approaches Reducing Innovative Obsolescence of Industrial Technologies in the Context of Industry 4.0, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Proceeding of the 14th International Scientific and Practical Conference, 2023, Volume I, pp. 180–186, Print ISSN 1691-5402, Online ISSN 2256-070X, DOI: https://doi.org/10.17770/etr2023vol1.7238 https://www.scopus.com/authid/detail.uri?authorId=56323816400
[14] D. Petrova, B. Vlahova, A. Lengerov and T. Zlateva-Petkova, Study of the State of Innovation Development and Obsolescence in the Republic of Bulgaria of Companies from the Mechanical Engineering Sector, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Proceeding of the 14th International Scientific and Practical Conference 2023, Volume I, pp. 187–194, Print ISSN 1691-5402, Online ISSN 2256-070X, DOI: https://doi.org/10.17770/etr2023vol1.7239 https://www.scopus.com/authid/detail.uri?authorId=56323816400
[15] D. Petrova, N. Nikolova and A.. Lengerov, Modeling business process reengineering in the digital era of industry 4.0, 11th International Scientific Conference “TechSys 2022” – Engineering, Technologies and Systems, AIP Conf. Proc. 2980,070013-1–070013-7; https://doi.org/10.1063/5.0185275, Published by AIP Publishing. 978-0-7354-4814-8/$30.00, pp. 070013-1 to 070013-7, ISSN 0094243X, 15517616, SJR=0,15.
[16] D. Petrova, N. Nikolova and A.. Lengerov, Organizational design of the management system of the reengineered enterprise - Design and implementation, 11th International Scientific Conference “TechSys 2022” – Engineering, Technologies and Systems, AIP Conf. Proc. 2980, 070012-1–070012-8; https://doi.org/10.1063/5.0185274 , Published by AIP Publishing. 978-0-7354-4814-8/$30.00, pp. 070012-1 to 070012-8, ISSN 0094243X, 15517616, SJR=0,15.
[17] D. Petrova, Innovative Obsolescence in Mechanical Engineering and Singleness of Indicators, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Volume 3, Pages 221 – 224, 2024, 15th International Scientific and Practical Conference on Environment. Technology. Resources, ETR 2024, Rezekne 27 June 2024 through 28 June 2024, ISSN 16915402, ISBN 978-171389957-0, DOI 10.17770/etr2024vol3.8123.
[18] T. Rachovski, D., Petrova and I. Ivanov, Automated Creation of Educational Questions: Analysis of Artificial Intelligence Technologies and Their Role in Education, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Volume 2, Pages 465 – 467, 2024, 15th International Scientific and Practical Conference on Environment. Technology. Resources, ETR 2024, Rezekne 27 June 2024 through 28 June 2024, ISSN 16915402, ISBN 978-171389957-0, DOI 10.17770/etr2024vol2.8101.
[19] R. Rusev and V. Galabov, Structuring ofrational planet-lever mechanism for passing the weft through the weaving machines. "Mechanics of machines" 2002 pp.26 booklet 33.
[20] S. Singh, Theory of Machines: Kinematics and Dynamics, Pearson Education, India 2011
[21] S. Stefanov, Theoretical mechanics, statics, kinematics and dynamics, Sofia 2014.
[22] P. Stoyanov, Geometric precision synthesisof planar lever mechanisms. "Mechanics ofthe machines" 2002 p.56 vol. 33.
[23] G. Timofeev, Theory of Mechanisms and Machines, Moskow Uride 2010.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Marin Marinov
This work is licensed under a Creative Commons Attribution 4.0 International License.
