INFLUENCE OF STRENGTH CHARACTERISTICS ON THE TECHNOLOGICAL PARAMETERS OF THE BOROALUMINIZING  PROCESS

Authors

  • Вeata Vlahova dep. “Automotive Engineering and Transport Logistics”, National Military University "V. Levski", Veliko Tarnovo, Bulgaria

DOI:

https://doi.org/10.68302/std2026.vol2.34

Keywords:

boroaluminizing, diffusion, proportional limit, relative elongation, tensile strength

Abstract

At present, data on the influence of boroaluminizing on the mechanical properties of steels are scarce and contradictory. This publication presents a mathematical model for determining the strength characteristics of medium-alloyed quality steel and their influence on the technological characteristics of the boroaluminizing process (saturation times, quenching and tempering temperatures). Based on the mathematical model, graphical relationships for Rm, R0.2 and A5 as a function of the technological characteristics of the boroaluminizing process have been developed.

Downloads

Download data is not yet available.

References

[1] V. Toshkov, Nitriding in low-temperature plasma, King, Sofia, 2013.

[2] I. Vinev, I. Miteva, Kinetics of Boride Layer Growth in Semi-Permeable Iron-Carbon-Cupper Powder Materials, UISC “Unitech”, 2019, 15-16, November 2019, Gabrovo, Proceeding v.II, pp 235-238, ISSN 1313-230X.

[3] I. Mitev and S. Tsenkulovski, Local Processing of Non-Metal Materials with Concentrated Energy Flow, 14th ISPC “Environment Technology Resources”, Rezekne, Latvia, Vol. 3, 2023, pp.183÷186,ISSN 1691-5402 print; ISSN 2256-070X online

[4] I. May and L. Schetky, Cooper in iron and steel, John Wiley and sons. Toronto, 1988, p.307, ISBN 0-471-05913-7.

[5] I. Miteva, I.Vinev and I.Mitev, Features of Alloying Matrix of Water-dispersed Iron Powders, 13th International Scientific and Practical Conference, 15.06.2021, Rezekne Academy of Technologies, Rezekne, Latvia,рр.226÷231.

[6] Lengerov, A., D., Petrova, M., Bozhakov, Technological Assurance Of The Milling Process Of Prismatic Channels In Heat Exchange Aluminum Alloys, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Volume 3, Pages 154 – 157, 2024, 15th International Scientific and Practical Conference on Environment. Technology. Resources, ETR 2024, Rezekne 27 June 2024 through 28 June 2024, ISSN 16915402, ISBN 978-171389957-0, DOI 10.17770/etr2024vol3.8163, ISSN 0094243X, 15517616.

[7] V. Konnur et al., Analysis of CNC turning parameters and simultaneous optimisation of surface roughness and material removal rate by MOGA for AISI 4340 alloy steel. Advances in Materials and Processing Technologies, 2024, 10 (4), 3885÷3908.

[8] I. Samsonov et al., A. Research on the design features of block-module tooling used on CNC machine tools. Part 1 – Analysis of block-module tooling used on CNC lathes. Volga Scientific Journal, volume 52 (12-3), 2015, 74÷80.

[9] V. Patel and R. Singh, Precision Robotics for CNC Machining. Industrial Automation Today, vol. 25, no. 5, 2020.

[10] T. Kuzmanov and Hr. Metev, Technology of Mechanical Engineering – Part IV, Technological Processes for CNC Machines, EKS-PRESS, Gabrovo, 2007, ISBN 954-485-033-4.

[11] G. Karlovski et al., Selection of Instrumentation Based on Statistical Analysis, XXXII International Scientific Symposium “Metrology and Metrology Assurance 2022”, Sozopol, 2022, 978-1-6654-8569-2/©2022 IEEE, DOI:10.1109/MMA55579. 2022.9992429.

[12] A. Shah, The Impact of Robotics on Manufacturing Efficiency and Productivity, Frontiers in Robotics and Automation, vol. 1, 73÷84, 2024.

[13] T. Simajaya et al. Workpiece Handling Systemusing 6-DOF Manipulator Robot for CNC Lathe Machine. Cyliinder: Jurnal Ilmiah Teknik Mesin. Vol. 3. No 2. 2017.

[14] B. Stewart, Overcoming Challenges in Six-Axis Robotic CNC Integration, Industrial Robotics Engineering, vol. 28, no. 2, 2020.

[15] K. Chan, Cartesian Robots and Their Role in CNC Operations. Automation & Manufacturing, vol. 29, no. 2, 2021.

[16] M. Javaid et al., Significant Capabilities of Robotics in Enhancing Industry 4.0 Implementation, Materials Today: Proceedings, 2021.

[17] R. James and S. Kumar, Challenges and Opportunities in Robotic CNC Machining. Robotics & Automation, vol. 14, no. 3, 2020.

[18] J. Ribeiro et al. Robotic Process Automation and Artificial Intelligence in Industry 4.0 – A Literature review / Procedia Computer Science 181 (2021). 51÷58.

[19] A. Souza, et al. Industry 4.0: Machine Learning to Monitor the Life Span of Cutting Tools in an Automotive Production Line, January 2021, International Journal of Advanced Engineering Research and Science 8(5):220÷228.

[20] I. Mitev, Materials and blanks – part 1 (Materials), Credo – 3M, Gabrovo, 2021, ISBN 978-619-7100-44-0.

[21] I. Ivanov, K., Petrov, T., Rachovski, D., Petrova, Methodological and Applied Aspects of Artificial Intelligence in Energy Consumption Prediction, Published by RTU PRESS, Environment. Technology. Resources. Rezekne, Latvia Proceedings of the 16th International Scientific and Practical Conference, 2025. Volume II, pp. 165-169, Online ISSN 2256-070X, ISSN 16915402, DOI: https://doi.org/10.17770/etr2025vol2.8601.

[22] Hr. Metev, K., Krumov, B., Vlahova, Economic aspects of the modular tools, AIP Conference Proceedings, Open Access, Volume 2980, Issue 124, January 2024, Article number 060001, 11th, International Scientific Conference on Engineering, Technologies and Systems, TechSys 2022, ISSN 0094243X, ISBN 978-073544814-8, DOI 10.1063/5.0184231.

[23] M. Marinov Jordanov, Vector-Matrix Computer Method for Drafting Circling-Point Curves and Centering-Point Curves of Burmester, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Volume 2, Pages 440 – 443, 2024, 15th International Scientific and Practical Conference on Environment. Technology. Resources, ETR 2024, Rezekne, 27 June 2024 through 28 June 2024, Code 201245, Conference Proceedings, ISSN 16915402, ISBN 978-171389957-0, DOI 10.17770/etr2024vol2.8072.

[24] Mokhtari Homami, Fadaei, R., Tehrani, A., Mirzadeh, H. et al. Optimization of turning process using artificial intelligence technology. Int J Adv Manuf Technol 70, 1205÷1217 (2014).

[25] D. Petrova, An Alternative Approach to Reducing Aging of Innovative Industrial Products in Terms of Industry 4.0, Environment. Technology. Recourses – Proceeding of the 13-th International Scientific and Practical Conference, Rezekne Academy of Technologies, Rezekne, Latvia, 2021, ISSN 1691-5402, Online ISSN 2256-070X, https://doi.org/10.17770/etr2021vol3.6507 p. 274-280, scopus. SJR=0,113.

[26] D. Petrova, An Approach to Modeling Innovation Obsolescence, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Proceeding of the 14th International Scientific and Practical Conference, 2023, Volume I, pp. 175–179, Print ISSN 1691-5402, Online ISSN 2256-070X, DOI: https://doi.org/10.17770/etr2023vol1.7237 , https://www.scopus.com/authid/detail.uri?authorId=56323816400.

[27] D. Petrova, Application of Alternative Approaches for Innovative Technology Obsolescence in Bulgarian Engineering Companies, Environment. Technology. Resources. Rezekne, Latvia Proceedings of the 16th International Scientific and Practical Conference, 2025. Volume IV, pp. 323-327, Online ISSN 2256-070X, ISSN 16915402, DOI: https://doi.org/10.17770/etr2025vol4.8462,

[28] D. Petrova, Classification of Micromechanical Elements and Fabrication of Beam-type Micromechanical Elements, Published by RTU PRESS, Environment. Technology. Resources. Rezekne, Latvia Proceedings of the 16th International Scientific and Practical Conference, 2025. Volume IV, pp. 289-296, Online ISSN 2256-070X, ISSN 16915402, DOI: https://doi.org/10.17770/etr2025vol4.8396.

[29] D. Petrova, Zlateva-Petkova, Ts., Lengerov, A., Methodology for Variant and Generative Design of Microcomponents Based on the CAD System "MICROSYS 25", Published by RTU PRESS, Environment. Technology. Resources. Rezekne, Latvia.Proceedings of the 16th International Scientific and Practical Conference, 2025. Volume IV, pp. 315-321, Online ISSN 2256-070X, ISSN 16915402, DOI: https://doi.org/10.17770/etr2025vol4.8442,

[30] D. Petrova, Zlateva-Petkova, Ts., Lengerov, A., Algorithm and Flowchart for Geometric Modeling of Microcomponents Based on the CAD System "MICROSYS 25", Published by RTU PRESS, Environment. Technology. Resources. Rezekne, Latvia Proceedings of the 16th International Scientific and Practical Conference, 2025. Volume IV, pp. 309-314, Online ISSN 2256-070X, ISSN 16915402, DOI: https://doi.org/10.17770/etr2025vol4.8441,

[31] N. Dolchinkov, Interconnection of digital, cultural, and strategic transformations on the Balkan Peninsula, Achieving Business Excellence Through Triple TransformationOpen source preview, 2025, pp. 209–240, ISBN13: 9798369394359, ISBN13 Softcover: 9798369394366, EISBN13: 9798369394373, DOI: 10.4018/979-8-3693-9435-9.ch008.

[32] O. Manav, S. Chinchanikar and M. Gadge, Multi-performance optimization in hard turning of AISI 4340 Steel using Swarm Optimization technique, in IConAMMA_2017, Materials Today: Proceedings, vol. 5, 24652÷24663, 2018.

[33] R.Saravanan, G. Sekar and M. Sachithanandam, Optimization of CNC machining operations subject to constraints using genetic algorithm (GA), Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore, India, 472÷479, 2000.

[34] S. Poornima, Optimization of machining parameter in CNC turning of martensitic stainless steel using RSM and GA. International Journal of Modern Engineering Research (IJMER) Vol.2, Issue.2, Mar.-Apr. 2012, 539÷542.

[35] S. Demirova, Turning knowledge into innovation and innovation into an effective product concept, International Conference on Creative Business for Smart and Sustainable Growth, CreBUS 2019Conference Paper2019, DOI: 10.1109/CREBUS.2019.8840107.

[36] S. Mumtaz, A. Alsohaily, Z. Pang, A. Rayes, K. F. Tsang and J. Rodriguez, 'Massive Internet of Things for Industrial Applications: Addressing Wireless IIoT Connectivity Challenges and Ecosystem Fragmentation', IEEE Industrial Electronics Magazine, vol. 11, no. 1, pp. 28-33, March 2017.

[37] S.Tsenkulovski, Mitev, I., Influence of the Parameters of the Laser Marking Process on the Depth of Penetration in Layer-reinforced Composites, Vide. Tehnologija. Resursi - Environment, Technology, Resources, Volume 3, Pages 319 – 324, 2024, 15th International Scientific and Practical Conference on Environment. Technology. Resources, ETR 2024, Rezekne, 27 June 2024 through 28 June 2024, Code 201245, Conference Proceedings, ISSN 16915402, ISBN 978-171389957-0, DOI 10.17770/etr2024vol3.8147.

[38] T. Kovachev and others, Density Before Sintering Water Dispersed Iron Powders, ISC UNITECH 2020, Volume II, ISSN 1313-230, pp. 46÷49.

[39] T. Kovachev and others, Influence of Pressure Force on Density Before sintering of Iron Powder materials Obtained by Reduction, AJ Industrial Technologies, Issue7/2020, ISSN 1314-9911, pp. 23÷27.

[40] V. Nikolova-Minkova, Bulgarian and Foreign Patent Activity in Bulgaria and Bulgarian Patent Activity Abroad by Technological Areas and Fields for the Period 2010-2021. Economic Studies (Ikonomicheski Izsledvania), 32(5), 2023, pp. 82-114. Available: https://archive.econstudies.iki.bas.bg/2023/2023_05/2023_05_06.pdf [Accessed: Febr. 10, 2025].

Downloads

Published

17.09.2026

Issue

Vol. 2 (2026): Proceedings of the International Conference on Secure Systems Design and Technology Development.

Section

ENGINEERING SCIENCES AND PRODUCTION TECHNOLOGY

License

Copyright (c) 2026 Вeata Vlahova

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
B. Vlahova, “INFLUENCE OF STRENGTH CHARACTERISTICS ON THE TECHNOLOGICAL PARAMETERS OF THE BOROALUMINIZING  PROCESS”, SysTechDev, vol. 2, pp. 345–349, Sep. 2026, doi: 10.68302/std2026.vol2.34.