MODELLING OF ACTIVE VIBRATION ISOLATION SYSTEM FOR AIR COMPRESSOR

Authors

  • Ivan Tashev Technical University Sofia, branch Plovdiv, Faculty of Mechanical Engineering; Department: Mechanical and Instrument Engineering, Plovdiv, Bulgaria https://orcid.org/0009-0004-1097-3874
  • Kiril Lengerov Technical University Sofia, branch Plovdiv, Faculty of Mechanical Engineering; Department: Mechanical and Instrument Engineering, Plovdiv, Bulgaria https://orcid.org/0009-0007-6478-4261

DOI:

https://doi.org/10.68302/std2026.vol2.104

Keywords:

active control, modelling of vibration isolators, closed-loop feedback, air compressor

Abstract

A subject of this article is to model a vibroisolation system for a sterile air compressor. The goal is to investigate the main parameters involved in analysing the system, which consists of mounting structure, modelled as absolutely rigid body, the compressor itself, modelled by inertial mass, with disturbances in operational conditions. In the course of the study several vibroisolation techniques are investigated and a proposed strategy of using active damping mounts for the structure is given.

Supporting Agencies

The author/s would like to thank the Research and Development Sector at the Technical University of Sofia for the financial support.

Downloads

Download data is not yet available.

References

[1] Zhang, M., & Matta, A. "Models and algorithms for throughput improvement problem of serial production lines via downtime reduction", IISE transactions, 2020, 52(11), 1189-1203.

[2] Habeeb A, "Reducing Downtime in Production Lines Through Proactive Maintenance Strategies", 2025.

[3] Sergei Pushenko1, Evgeny Bozhko1, Irina Zolotuhina1, "Methods for reducing vibrations generated by shock equipment", E3S Web of Conferences 164, 01026, 2020.

[4] Bartos, Marcell, Habib, Giuseppe, "Hybrid vibration absorber for self-induced vibration supression: exact analytical formulas for acceleration feedback control", An International Journal of Theoretical and Applied Mechanics, Vol. 58, 2023.

[5] Hartog DJ, "Mechanical vibrations", McGraw-Hill, New York, 1956.

[6] Reza Mirsanei, Aidin Hajikhani, Behzad Peykari, Jahanbakhsh Hamedi, "Developing a New Design for Adaptive Tuned Dynamic Vibration Absorber (ATDVA) Based on Smart Slider-Crank Mechanism to Control of Undesirable Vibrations", Avestia Publishing, International Journal of Mechanical Engineering and Mechatronics, Volume 1, Issue 1, Year 2012.

[7] Nicholas Alexander, Frank Schilder, "Exploring the performance of a nonlinear tuned mass damper", 1995-2010, Journal of Sound and Vibration, 2009, 319 (1-2), pp.445-462.

[8] Casciati S, Chen Z, "An active mass damper system for structural control using real-time wireless sensors", Struct Control Health Monit 19(8):758–767, 2012.

[9] Collette C, Chesné C, "Robust hybrid mass damper", J Sound Vib 375:19–27, 2016.

[10] Xi Wang, Bintang Yang, Jiaxin You, Zhe Gao, "Coarse-fine adaptive tuned vibration absorber with high frequency resolution", Journal of Sound and Vibration Volume 383, 24 November 2016, Pages 46-63.

[11] Michael Camber, "Piston vs Rotary Screw compressor", Kaeser Cpmpressors Inc, 2019.

[12] R.C. Hilbert, "Engineering Mechanics Dynamics", Published by Pearson PrenticeHall, 2010.

Downloads

Published

17.09.2026

Issue

Vol. 2 (2026): Proceedings of the International Conference on Secure Systems Design and Technology Development.

Section

ENGINEERING SCIENCES AND PRODUCTION TECHNOLOGY

License

Copyright (c) 2026 Ivan Tashev, Kiril Lengerov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
I. Tashev and K. Lengerov, “MODELLING OF ACTIVE VIBRATION ISOLATION SYSTEM FOR AIR COMPRESSOR”, SysTechDev, vol. 2, pp. 315–320, Sep. 2026, doi: 10.68302/std2026.vol2.104.